Difference between revisions of "Talos II/Building FAQ"

From RCS Wiki
Jump to navigation Jump to search
m
Line 7: Line 7:
 
This is normal for now. (It may have been compromised still, but the broken labels don't indicate that.)
 
This is normal for now. (It may have been compromised still, but the broken labels don't indicate that.)
  
== Where do I get the stand-offs and screws? ==
+
== Mounting in case ==
 +
 
 +
=== Where do I get the stand-offs and screws? ===
  
 
They should come with your case. (Check inside drive bays and such.)
 
They should come with your case. (Check inside drive bays and such.)
  
== Should I use rubber spacers with the stand-offs? ==
+
=== Should I use rubber spacers with the stand-offs? ===
  
 
Stand-offs are supposed to help ground the motherboard, so it's better not to.
 
Stand-offs are supposed to help ground the motherboard, so it's better not to.
  
== My case doesn't have holes for some stand-offs! ==
+
=== My case doesn't have holes for some stand-offs! ===
  
 
Not necessarily a big deal, especially for the top-left where the I/O plate helps hold it in place.
 
Not necessarily a big deal, especially for the top-left where the I/O plate helps hold it in place.
Line 22: Line 24:
 
Such bending may damage the board!
 
Such bending may damage the board!
  
== What is an indium pad? Does the stock HSF include it? ==
+
== CPU/HSF installation ==
 +
 
 +
=== What is an indium pad? Does the stock HSF include it? ===
  
 
Indium pads help heat transfer from the CPU to the HSF.
 
Indium pads help heat transfer from the CPU to the HSF.
Line 28: Line 32:
 
More powerful CPUs should ship with them if required (TBD whether pre-applied to the HSF, or separately).
 
More powerful CPUs should ship with them if required (TBD whether pre-applied to the HSF, or separately).
  
== Should I remove the label/sticker from the HSF? ==
+
=== Should I remove the label/sticker from the HSF? ===
  
 
No.
 
No.

Revision as of 02:03, 6 April 2018

Where is the installation manual online?

File:T2P9D01 users guide version 1 0.pdf

My motherboard bag's seal/labels are broken! Has it been compromised?

This is normal for now. (It may have been compromised still, but the broken labels don't indicate that.)

Mounting in case

Where do I get the stand-offs and screws?

They should come with your case. (Check inside drive bays and such.)

Should I use rubber spacers with the stand-offs?

Stand-offs are supposed to help ground the motherboard, so it's better not to.

My case doesn't have holes for some stand-offs!

Not necessarily a big deal, especially for the top-left where the I/O plate helps hold it in place.

However, note that without stand-offs, you may accidentally bend the board when inserting CPUs, RAM, or other components. Such bending may damage the board!

CPU/HSF installation

What is an indium pad? Does the stock HSF include it?

Indium pads help heat transfer from the CPU to the HSF. 4-core and 8-core CPUs do not require them (and do not ship with them). More powerful CPUs should ship with them if required (TBD whether pre-applied to the HSF, or separately).

Should I remove the label/sticker from the HSF?

No. Do not remove the label/sticker, or you will void your warranty.

Front panel I/O

Which is the other side of the buttons?

Ground? (guess)

Are the LED "cathode" pins the plus or minus side?

(Unknown)

What should the other side of the LED be connected to?

(Unknown)

What does the Identify button do?

(Unknown)

What does the NMI button do?

(Unknown)

What is OCC mode?

(Unknown)

What are the effects of the "CPU secure mode disable" jumpers?

(Unknown)