Talos II
Revision as of 17:30, 19 September 2022 by JeremyRand (talk | contribs) (→Notes: Mismatched DD2.2/DD2.3 works fine)
Talos™ II is Raptor Computing Systems' next-generation POWER9 platform. Focusing on security and performance, it is a dual socket PowerNV system that is available in desktop, workstation, and server form factors, or as bare mainboard.
Talos II is the successor to the proposed Talos I system.
Contents
Mainboard
Specifications
Mainboard Part # | Form Factor | CPU Type | Networking | Storage Controller |
---|---|---|---|---|
T2P9D01 | EATX | POWER9 Sforza | 2x GbE (Broadcom BCM5719) | SAS (optional, Microsemi PM8068) |
- EATX form factor
- Two POWER9-compatible CPU sockets accepting 4-/8-/18- or 22-core Sforza CPUs
- 16 DDR4 ECC registered RAM slots, quad-channel, supporting up to 2TB main memory
- Two Gigabit Ethernet ports provided by a Broadcom BCM5719 chip
- One Microsemi SAS 3.0 controller (optional, upcharge on selection)
- Four USB 3.0 ports (2x rear, 2x on header for front panel) via firmware-free TUSB7340 XHCI chip
- One additional internal USB 2.0 Type-A port
- 1 VGA video port
- 3 PCIe 4.0 x16 slots
- 2 PCIe 4.0 x8 slots
- AST2500 BMC with OpenBMC
Notes
- Sforza CPU models not sold by Raptor (of any core count) are expected to work.
- CPUs with a TDP greater than 190W are likely to work, but it is possible that they will trigger a shutdown due to power overload (shouldn't cause any damage). Test reports welcome.
- Mismatched DD2.2/DD2.3 Sforza CPU models work fine (the DD2.3 CPU will behave like a DD2.2 model); DD2.1 should not be mixed with production steppings.
T2P9D01 Configuration SKUs
SKU | Sockets | RAM slots | PCIe 4.0 slots | SAS Controller |
---|---|---|---|---|
TL1MB1 | 1 | 8 | 1 x16, 1 x8 | Does not change SKU |
TL2MB1 | 2 | 16 | 3 x16, 2 x8 | Does not change SKU |
High-Resolution pictures
User manual
The primary user manual for the Talos II is the T2P9D01 User's Guide For Configuration and Setup.
Systems
In addition to being available as a mainboard, prebuilt systems are also available.
SKU | Name |
---|---|
TL2WK2 | Talos II Secure Workstation |
TL2SV1 | Talos II 2U Rack Mount Development Platform |
TL2SV2 | Talos II 4U Rack Mount Development Platform |
TL2DS1 | Talos II Desktop Development System |
TLSDS1 | Talos II Special Developer System (DD2.1 stepping CPU) |
TLSDS3 | Talos II Entry-Level Developer System |
TL1BC1 | Talos II Lite Base Single CPU Board and Chassis |
Energy consumption
NOTE: numbers are approximate and may vary. System power measured at wall with standard instruments. CPU power reported by OCC.
Component | Design Power | Power Use (Idle) | Power Use (Full Load) | Additional Information |
---|---|---|---|---|
4-core CPU (DD2.1, 3.1/3.7GHz) | 90W | 31W | 58W | CPU held at 50°C die temperature. WoF not yet boosting to full power. |
PM8068 SAS controller | 23W | |||
Desktop Development System (TL2DS1) | 111W | 192W | 2x 4-core CPUs, 2x 16GB RAM, 1x 1TB NVMe drive, integrated PM8068 SAS. 80% efficiency PSU. |
Support
- T2P9D01 User's Guide For Configuration and Setup is the primary user manual for the Talos II
- Talos II Hardware Compatibility List
- Talos II Firmware Updates
- Troubleshooting/GPU
- Troubleshooting/BMC Power
How To
- Configure Power Restore States
- Add GPU Firmware To BOOTKERNFW
- Talos II/Mechanical Specifications
- System Assembly Video - SC747TG-R1400B-SQ Chassis
- Fan Tuning
See also
- POWER9 - CPU used by Talos II
- Blackbird - single socket, μATX cousin
- Talos I - predecessor, proposed POWER8 system
- Talos II/Building_FAQ
External Links
- Talos II homepage at Raptor Computing Systems' website