Difference between revisions of "User:MarcusC/Hakua"
Jump to navigation
Jump to search
| Line 56: | Line 56: | ||
|} | |} | ||
| − | The BitFenix case works reasonably well, although the mounting stud compatibility leaves something to be desired. | + | The BitFenix case works reasonably well, although the mounting stud compatibility |
| + | [[User:MarcusC/BitFenix_Aurora|leaves something to be desired]]. | ||
The following mismatches between front panel and motherboard capabilities exist: | The following mismatches between front panel and motherboard capabilities exist: | ||
Revision as of 12:29, 10 May 2018
Hakua is a system I built from a Basic Talos™ II Bundle (Dual CPU) plus components sourced at local retailers, as detailed below.
| Component | Brand | Model | Cost |
|---|---|---|---|
| Case | BitFenix | Aurora | $135.75 |
| 550W PSU | Corsair | TX550M 80+ GOLD | $104.87 |
| PSU extra EPS cable | Corsair | CP-8920115 | $12.02 |
| 64GB RAM | Kingston | KTH-PL424/16G x4 | $1243.63 |
| 512GB NVMe storage | WD | WDS512G1X0C | $245.81 |
| PCIe to M.2 adapter | DeLOCK | 89370 | $30.63 |
| Graphics card | GIGABYTE | Radeon RX 550 2GB | $138.59 |
| Sound card | ASUS | XONAR DGX | $48.79 |
| Internal USB2 cable | Akasa | EXUSBIE-40 | $9.14 |
| Total | $1969.23 | ||
The BitFenix case works reasonably well, although the mounting stud compatibility leaves something to be desired.
The following mismatches between front panel and motherboard capabilities exist:
- There are no NIC link or Fan fail LEDs on the front panel (not a big issue)
- There are no Identify or NMI buttons on the front panel (again, no biggie)
- The front panel has two USB3 and two USB2 connectors, but the MB only provides two USB3 and one USB2 connection internally, so one USB2 connector remains unconnected
