Difference between revisions of "Talos II"

From RCS Wiki
Jump to navigation Jump to search
(add link)
(→‎Systems: Add Rail Kit info)
 
(49 intermediate revisions by 13 users not shown)
Line 1: Line 1:
 +
[[File:Talos_ii_rev_1.00_non-sas.png|thumb|TL2MB1 without optional SAS controller]]
 +
 
'''Talos™ II''' is [[Raptor Computing Systems|Raptor Computing Systems]]' next-generation [[POWER9|POWER9]] platform.  Focusing on security and performance, it is a dual socket [[PowerNV|PowerNV]] system that is available in desktop, workstation, and server form factors, or as bare mainboard.
 
'''Talos™ II''' is [[Raptor Computing Systems|Raptor Computing Systems]]' next-generation [[POWER9|POWER9]] platform.  Focusing on security and performance, it is a dual socket [[PowerNV|PowerNV]] system that is available in desktop, workstation, and server form factors, or as bare mainboard.
  
Line 4: Line 6:
  
 
== Mainboard ==
 
== Mainboard ==
 +
 +
[[File:Talos_ii_rev_3_7_block_diagram.png|thumb|T2P9D01 Block Diagram]]
  
 
=== Specifications ===
 
=== Specifications ===
Line 10: Line 14:
 
! style="text-align:left;"| Mainboard Part #
 
! style="text-align:left;"| Mainboard Part #
 
! style="text-align:left;"| Form Factor
 
! style="text-align:left;"| Form Factor
! style="text-align:left;"| Sockets
 
 
! style="text-align:left;"| CPU Type
 
! style="text-align:left;"| CPU Type
 
! style="text-align:left;"| Networking
 
! style="text-align:left;"| Networking
Line 17: Line 20:
 
|T2P9D01
 
|T2P9D01
 
|[[EATX|EATX]]
 
|[[EATX|EATX]]
 +
|POWER9 [[Sforza|Sforza]]
 +
|2x GbE (Broadcom [[BCM5719|BCM5719]])
 +
|SAS (optional, Microsemi [[PM8068|PM8068]])
 +
|}
 +
 +
* EATX form factor
 +
* Two [[POWER9]]-compatible CPU sockets accepting 4-/8-/18- or 22-core [[Sforza]] CPUs
 +
* 16 DDR4 ECC registered RAM slots, quad-channel, supporting up to 2TB main memory
 +
* Two Gigabit Ethernet ports provided by a Broadcom [[BCM5719]] chip
 +
* One Microsemi SAS 3.0 controller (optional, upcharge on selection)
 +
* Four USB 3.0 ports (2x rear, 2x on header for front panel) via firmware-free [[TUSB7340]] XHCI chip
 +
* One additional internal USB 2.0 Type-A port
 +
* 1 VGA video port via BMC (2D framebuffer)
 +
* 3 PCIe 4.0 x16 slots (single-width)
 +
* 2 PCIe 4.0 x8 slots
 +
* [[AST2500]] BMC with OpenBMC
 +
 +
=== Notes ===
 +
 +
* Sforza CPU models not sold by Raptor (of any core count) are expected to work.
 +
* CPUs with a TDP greater than 190W are [https://twitter.com/RaptorCompSys/status/1566932860627550208 likely to work], but it is possible that they will trigger a shutdown due to power overload (shouldn't cause any damage).  Test reports welcome.
 +
* Mismatched DD2.2/DD2.3 Sforza CPU models [https://twitter.com/RaptorCompSys/status/1569433273230839808 work fine] (the DD2.3 CPU will behave like a DD2.2 model); DD2.1 should not be mixed with production steppings.
 +
* Mismatched Sforza CPU clock speeds [https://twitter.com/RaptorCompSys/status/1569667419316125696 probably will fail to boot] with current firmware; Raptor Engineering might be available to implement firmware support as contract work.
 +
* Mismatched Sforza core counts [https://twitter.com/RaptorCompSys/status/1572045224243007488 will probably guard out the second CPU] with current firmware; Raptor Engineering might be available to implement firmware support as contract work.
 +
 +
=== T2P9D01 Configuration SKUs ===
 +
 +
{| class="wikitable sortable"
 +
! style="text-align:left;"| SKU
 +
! style="text-align:left;"| Sockets
 +
! style="text-align:left;"| RAM slots
 +
! style="text-align:left;"| PCIe 4.0 slots
 +
! style="text-align:left;"| SAS Controller
 +
|-
 +
|TL1MB1
 +
|1
 +
|8
 +
|1 x16, 1 x8
 +
|Does not change SKU
 +
|-
 +
|TL2MB1
 
|2
 
|2
|[[POWER9|POWER9]] [[Sforza|Sforza]]
+
|16
|2x GbE (Broadcom [[BCM95719|BCM95719]])
+
|3 x16, 2 x8
|SAS (optional, Microsemi [[PM8068|PM8068]])
+
|Does not change SKU
 
|}
 
|}
 +
 +
===High-Resolution pictures===
 +
 +
<gallery>
 +
File:Talos_ii_rev_1.00_top.png|thumb|baseline|center|Front View
 +
File:Talos_ii_rev_1.00_bottom.png|thumb|baseline|center|Bottom View
 +
</gallery>
 +
 +
== User manual ==
 +
 +
The primary user manual for the Talos II is the [[:File:T2P9D01 users guide version 1 0.pdf|T2P9D01 User's Guide For Configuration and Setup]].
  
 
== Systems ==
 
== Systems ==
Line 32: Line 87:
 
|-
 
|-
 
|TL2WK2
 
|TL2WK2
|Talos II Secure Workstation
+
|Talos II Secure Workstation (Can be converted to 4U rack mount via "Rail Kit" add-on)
 +
|-
 +
|TL2SV1
 +
|Talos II 2U Rack Mount Development Platform
 
|-
 
|-
 
|TL2SV2
 
|TL2SV2
|Talos II Rack Mount Development Platform
+
|Talos II 4U Rack Mount Development Platform
 
|-
 
|-
 
|TL2DS1
 
|TL2DS1
 
|Talos II Desktop Development System
 
|Talos II Desktop Development System
 +
|-
 +
|TLSDS1
 +
|Talos II Special Developer System (DD2.1 stepping CPU)
 +
|-
 +
|TLSDS3
 +
|Talos II Entry-Level Developer System
 +
|-
 +
|TL1BC1
 +
|Talos II Lite Base Single CPU Board and Chassis
 +
|}
 +
 +
== Energy consumption ==
 +
 +
NOTE: numbers are approximate and may vary.  System power measured at wall with standard instruments.  CPU power reported by [[OCC|OCC]].
 +
 +
{| class="wikitable sortable"
 +
! style="text-align:left;"| Component
 +
! style="text-align:left;"| Design Power
 +
! style="text-align:left;"| Power Use (Idle)
 +
! style="text-align:left;"| Power Use (Full Load)
 +
! style="text-align:left;"| Additional Information
 +
|-
 +
|4-core CPU (DD2.1, 3.1/3.7GHz)
 +
|90W
 +
|31W
 +
|58W
 +
|CPU held at 50°C die temperature. WoF not yet boosting to full power.
 +
|-
 +
|PM8068 SAS controller
 +
|23W
 +
|
 +
|
 +
|-
 +
|Desktop Development System (TL2DS1)
 +
|
 +
|111W
 +
|192W
 +
|2x 4-core CPUs, 2x 16GB RAM, 1x 1TB NVMe drive, integrated PM8068 SAS.  80% efficiency PSU.
 
|}
 
|}
 +
 +
== Support ==
 +
 +
* [[:File:T2P9D01 users guide version 1 0.pdf|T2P9D01 User's Guide For Configuration and Setup]] is the primary user manual for the Talos II
 +
* [[Talos II/Hardware Compatibility List|Talos II Hardware Compatibility List]]
 +
* [[Talos_II/Firmware|Talos II Firmware Updates]]
 +
* [[Troubleshooting/GPU|Troubleshooting/GPU]]
 +
* [[Troubleshooting/BMC Power]]
 +
 +
=== How To ===
 +
 +
* [[Talos II/Configure Power Restore States|Configure Power Restore States]]
 +
* [[Talos II/Add GPU Firmware To BOOTKERNFW|Add GPU Firmware To BOOTKERNFW]]
 +
* [[Talos II/Mechanical Specifications]]
 +
* [https://wiki.raptorcs.com/w/images/e/e4/TalosII_SystemAssembly_nashimus_v3.mp4 System Assembly Video - SC747TG-R1400B-SQ Chassis]
 +
* [[Fan Tuning]]
  
 
== See also ==
 
== See also ==
  
* [[Hardware Compatibility List|Hardware Compatibility List]]
+
* [[POWER9|POWER9]] - CPU used by Talos II
 +
* [[Blackbird|Blackbird]] - single socket, μATX cousin
 +
* [[Talos I|Talos I]] - predecessor, proposed POWER8 system
 +
* [[Talos II/Building_FAQ]]
  
 
== External Links ==
 
== External Links ==
  
* [https://raptorcs.com/TALOSII/ Raptor Computing Systems page for Talos II] - information on currently available systems and ordering a Talos™ II machine
+
* [https://raptorcs.com/TALOSII/ Talos II homepage] at Raptor Computing Systems' website
  
 
[[Category:Raptor Computing Systems (RCS) Platforms]]
 
[[Category:Raptor Computing Systems (RCS) Platforms]]

Latest revision as of 04:04, 7 January 2023

TL2MB1 without optional SAS controller

Talos™ II is Raptor Computing Systems' next-generation POWER9 platform. Focusing on security and performance, it is a dual socket PowerNV system that is available in desktop, workstation, and server form factors, or as bare mainboard.

Talos II is the successor to the proposed Talos I system.

Mainboard

T2P9D01 Block Diagram

Specifications

Mainboard Part # Form Factor CPU Type Networking Storage Controller
T2P9D01 EATX POWER9 Sforza 2x GbE (Broadcom BCM5719) SAS (optional, Microsemi PM8068)
  • EATX form factor
  • Two POWER9-compatible CPU sockets accepting 4-/8-/18- or 22-core Sforza CPUs
  • 16 DDR4 ECC registered RAM slots, quad-channel, supporting up to 2TB main memory
  • Two Gigabit Ethernet ports provided by a Broadcom BCM5719 chip
  • One Microsemi SAS 3.0 controller (optional, upcharge on selection)
  • Four USB 3.0 ports (2x rear, 2x on header for front panel) via firmware-free TUSB7340 XHCI chip
  • One additional internal USB 2.0 Type-A port
  • 1 VGA video port via BMC (2D framebuffer)
  • 3 PCIe 4.0 x16 slots (single-width)
  • 2 PCIe 4.0 x8 slots
  • AST2500 BMC with OpenBMC

Notes

  • Sforza CPU models not sold by Raptor (of any core count) are expected to work.
  • CPUs with a TDP greater than 190W are likely to work, but it is possible that they will trigger a shutdown due to power overload (shouldn't cause any damage). Test reports welcome.
  • Mismatched DD2.2/DD2.3 Sforza CPU models work fine (the DD2.3 CPU will behave like a DD2.2 model); DD2.1 should not be mixed with production steppings.
  • Mismatched Sforza CPU clock speeds probably will fail to boot with current firmware; Raptor Engineering might be available to implement firmware support as contract work.
  • Mismatched Sforza core counts will probably guard out the second CPU with current firmware; Raptor Engineering might be available to implement firmware support as contract work.

T2P9D01 Configuration SKUs

SKU Sockets RAM slots PCIe 4.0 slots SAS Controller
TL1MB1 1 8 1 x16, 1 x8 Does not change SKU
TL2MB1 2 16 3 x16, 2 x8 Does not change SKU

High-Resolution pictures

User manual

The primary user manual for the Talos II is the T2P9D01 User's Guide For Configuration and Setup.

Systems

In addition to being available as a mainboard, prebuilt systems are also available.

SKU Name
TL2WK2 Talos II Secure Workstation (Can be converted to 4U rack mount via "Rail Kit" add-on)
TL2SV1 Talos II 2U Rack Mount Development Platform
TL2SV2 Talos II 4U Rack Mount Development Platform
TL2DS1 Talos II Desktop Development System
TLSDS1 Talos II Special Developer System (DD2.1 stepping CPU)
TLSDS3 Talos II Entry-Level Developer System
TL1BC1 Talos II Lite Base Single CPU Board and Chassis

Energy consumption

NOTE: numbers are approximate and may vary. System power measured at wall with standard instruments. CPU power reported by OCC.

Component Design Power Power Use (Idle) Power Use (Full Load) Additional Information
4-core CPU (DD2.1, 3.1/3.7GHz) 90W 31W 58W CPU held at 50°C die temperature. WoF not yet boosting to full power.
PM8068 SAS controller 23W
Desktop Development System (TL2DS1) 111W 192W 2x 4-core CPUs, 2x 16GB RAM, 1x 1TB NVMe drive, integrated PM8068 SAS. 80% efficiency PSU.

Support

How To

See also

External Links