Difference between revisions of "Talos II"
Jump to navigation
Jump to search
m (→How To: add link to Fan tuning) |
m (Add link to Mechanical Specifications) |
||
| Line 141: | Line 141: | ||
* [[Talos II/Configure Power Restore States|Configure Power Restore States]] | * [[Talos II/Configure Power Restore States|Configure Power Restore States]] | ||
* [[Talos II/Add GPU Firmware To BOOTKERNFW|Add GPU Firmware To BOOTKERNFW]] | * [[Talos II/Add GPU Firmware To BOOTKERNFW|Add GPU Firmware To BOOTKERNFW]] | ||
| + | * [[Talos II/Mechanical Specifications]] | ||
* [https://wiki.raptorcs.com/w/images/e/e4/TalosII_SystemAssembly_nashimus_v3.mp4 System Assembly Video - SC747TG-R1400B-SQ Chassis] | * [https://wiki.raptorcs.com/w/images/e/e4/TalosII_SystemAssembly_nashimus_v3.mp4 System Assembly Video - SC747TG-R1400B-SQ Chassis] | ||
* [[Fan Tuning]] | * [[Fan Tuning]] | ||
Revision as of 20:18, 21 August 2019
Talos™ II is Raptor Computing Systems' next-generation POWER9 platform. Focusing on security and performance, it is a dual socket PowerNV system that is available in desktop, workstation, and server form factors, or as bare mainboard.
Talos II is the successor to the proposed Talos I system.
Contents
Mainboard
Specifications
| Mainboard Part # | Form Factor | CPU Type | Networking | Storage Controller |
|---|---|---|---|---|
| T2P9D01 | EATX | POWER9 Sforza | 2x GbE (Broadcom BCM5719) | SAS (optional, Microsemi PM8068) |
- EATX form factor
- Two POWER9-compatible CPU sockets accepting 4-/8-/18- or 22-core Sforza CPUs
- 16 DDR4 ECC registered RAM slots, quad-channel, supporting up to 2TB main memory
- Two Gigabit Ethernet ports provided by a Broadcom BCM5719 chip
- One Microsemi SAS 3.0 controller (optional, upcharge on selection)
- Four USB 3.0 ports (2x rear, 2x on header for front panel) via firmware-free TUSB7340 XHCI chip
- One additional internal USB 2.0 Type-A port
- 1 VGA video port
- 3 PCIe 4.0 x16 slots
- 2 PCIe 4.0 x8 slots
- AST2500 BMC with OpenBMC
T2P9D01 Configuration SKUs
| SKU | Sockets | RAM slots | PCIe 4.0 slots | SAS Controller |
|---|---|---|---|---|
| TL1MB1 | 1 | 8 | 1 x16, 1 x8 | Does not change SKU |
| TL2MB1 | 2 | 16 | 3 x16, 2 x8 | Does not change SKU |
High-Resolution pictures
Front View
Bottom View
User manual
The primary user manual for the Talos II is the T2P9D01 User's Guide For Configuration and Setup.
Systems
In addition to being available as a mainboard, prebuilt systems are also available.
| SKU | Name |
|---|---|
| TL2WK2 | Talos II Secure Workstation |
| TL2SV1 | Talos II 2U Rack Mount Development Platform |
| TL2SV2 | Talos II 4U Rack Mount Development Platform |
| TL2DS1 | Talos II Desktop Development System |
| TLSDS1 | Talos II Special Developer System (DD2.1 stepping CPU) |
| TLSDS3 | Talos II Entry-Level Developer System |
| TL1BC1 | Talos II Lite Base Single CPU Board and Chassis |
Energy consumption
NOTE: numbers are approximate and may vary. System power measured at wall with standard instruments. CPU power reported by OCC.
| Component | Design Power | Power Use (Idle) | Power Use (Full Load) | Additional Information |
|---|---|---|---|---|
| 4-core CPU (DD2.1, 3.1/3.7GHz) | 90W | 31W | 58W | CPU held at 50°C die temperature. WoF not yet boosting to full power. |
| PM8068 SAS controller | 23W | |||
| Desktop Development System (TL2DS1) | 111W | 192W | 2x 4-core CPUs, 2x 16GB RAM, 1x 1TB NVMe drive, integrated PM8068 SAS. 80% efficiency PSU. |
Support
- T2P9D01 User's Guide For Configuration and Setup is the primary user manual for the Talos II
- Talos II Hardware Compatibility List
- Talos II Firmware Updates
- Troubleshooting/GPU
- Troubleshooting/BMC Power
How To
- Configure Power Restore States
- Add GPU Firmware To BOOTKERNFW
- Talos II/Mechanical Specifications
- System Assembly Video - SC747TG-R1400B-SQ Chassis
- Fan Tuning
See also
- POWER9 - CPU used by Talos II
- Blackbird - single socket, μATX cousin
- Talos I - predecessor, proposed POWER8 system
External Links
- Talos II homepage at Raptor Computing Systems' website
