Search results

Jump to navigation Jump to search
  • ...vent the component from working until the spurious guard entry is manually cleared. To clear the guard partition (and thereby force the system to try those components a
    993 bytes (163 words) - 10:26, 24 December 2022
  • ...PU cooler into an active HSF. One only needs to manufacture a shroud which clears the extrusion of one of the retention mechanisms. ...mating your measurement as 25mm is the minimum distance for this shroud to clear the retention latch. Next, cut a 33mm wide gap into the bottom of the ring.
    2 KB (412 words) - 22:36, 16 November 2019
  • * You can clear power sequencer error flags (enabling you to try powering on again) by runn $ i2cget -y 12 0x31 0x03 # Clear errors
    5 KB (868 words) - 07:41, 19 January 2020
  • {{clear}} A “tracking pixel” (sometimes called “web beacons”, “transparent GIFs”, “clear GIFs”, “pixel gifs”, or “pixel tags”) is a tiny, invisible image
    6 KB (968 words) - 14:21, 23 December 2017
  • # Clear the old build output and re-build. Our aim in building the first time was o # Repeat the "clear the old build output and re-build" step.
    6 KB (962 words) - 20:54, 26 March 2020
  • ...s and dbus, the exact steps taken to boot and their ordering is not always clear. This page attempts to clearly document them.
    4 KB (664 words) - 18:06, 28 August 2019
  • ...o7kvipheu6mtr623eyyehj4yd.onion/ Kicksecure] ([https://www.kicksecure.com/ clearnet link]) can be installed on POWER. These instructions were tested with K ...://www.kicksecure.com/wiki/Debian#Add_the_Kicksecure_%E2%84%A2_Signing_Key clearnet]):
    5 KB (819 words) - 22:40, 13 May 2023
  • ...n we collect from you that could be used to personally identify you. To be clear, while we do not necessarily collect all of the following types of informat
    2 KB (315 words) - 14:17, 23 December 2017
  • ...xgbbeyds25rbsgr73tbfpqpt4a6vjwsyd.onion/ Whonix] ([https://www.whonix.org/ clearnet link]) can be installed on POWER using KVM. These instructions were tes ...download page] ([https://www.whonix.org/wiki/KVM#Download_Whonix_.E2.84.A2 clearnet link]).
    8 KB (1,194 words) - 10:13, 4 June 2022
  • ...t settings, but the existing persistent data has not yet been cleared. To clear it, log in as root, then run: ...in practice, they are still preliminary. Ask questions in IRC if you are unclear on what to do!
    10 KB (1,716 words) - 20:29, 4 September 2022
  • ...of a lost or forgotten Petitboot menu passphrase, it should be possible to clear as long as the BMC remains accessible. Credentials for Petitboot reside sep
    3 KB (511 words) - 17:54, 6 June 2023
  • ...m previous firmware versions may show up in the system inventory. You can clear these from the BMC command line, with chassis power '''off''' as follows:<B
    3 KB (571 words) - 01:18, 23 February 2020
  • ...m previous firmware versions may show up in the system inventory. You can clear these from the BMC command line, with chassis power '''off''' as follows:<B
    3 KB (581 words) - 12:18, 3 May 2022
  • ...ox.life/2018/11/03/clearing-confusion-regarding-modern-powerpc-endianness/ Clearing confusion regarding modern PowerPC endianness]</ref> This is in contrast
    4 KB (632 words) - 23:10, 17 May 2023
  • ..., located on the ATX power connector, in your correspondence, along with a clear and concise description of the problem.
    13 KB (1,845 words) - 13:59, 29 August 2019