Difference between revisions of "Blackbird"

From RCS Wiki
Jump to navigation Jump to search
m (add text to mainboard image)
Line 24: Line 24:
  
 
* MicroATX form factor
 
* MicroATX form factor
* One socket accepting a 4-core or 8-core POWER9 [[Sforza]] CPU
+
* One socket accepting a 4-core or 8-core [[POWER9]] [[Sforza]] CPU
 
* Two DDR4 memory channels (ECC memory required)
 
* Two DDR4 memory channels (ECC memory required)
 
* Three Gigabit Ethernet ports provided by a Broadcom [[BCM5719]] chip
 
* Three Gigabit Ethernet ports provided by a Broadcom [[BCM5719]] chip

Revision as of 13:09, 7 August 2019

C1P9S01 Mainboard

Blackbird™ is an adaptation of Raptor Computing Systems' next-generation POWER9 platform to the μATX (microATX) form factor. Focusing on the desktop use case, it is a single socket PowerNV system.

Mainboard

C1P9S01 Block Diagram

Specifications

Mainboard Part # Form Factor CPU Type Networking Storage Controller
C1P9S01 MicroATX POWER9 Sforza 3x GbE (Broadcom BCM5719) 4x SATA
  • MicroATX form factor
  • One socket accepting a 4-core or 8-core POWER9 Sforza CPU
  • Two DDR4 memory channels (ECC memory required)
  • Three Gigabit Ethernet ports provided by a Broadcom BCM5719 chip
  • Four SATA ports provided by a firmware-free Marvell 88SE9235 SATA chip
  • 5.1 audio supporting analog and S/PDIF outputs
  • HDMI output via BMC (2D framebuffer), using a firmware-free IT66121FN PHY chip
  • Four USB 3.0 ports (2x rear, 2x on header for front panel) via firmware-free TUSB7340 XHCI chip
  • One additional internal USB 2.0 Type-A port
  • One x16 PCIe Gen4 slot
  • One x8 PCIe Gen4 slot
  • AST2500 BMC with OpenBMC

Notes

  • CPUs with more than eight cores may operate without WoF due to power regulator limitations.
  • CPUs with four and eight cores function normally.

Support

See also

External Links