Difference between revisions of "BCM5719"

From RCS Wiki
Jump to navigation Jump to search
(Created page with "==Overview== The BCM5719 is the NIC integrated into the Talos™ II systems. It is based on the wildly popular NetXtreme architecture, and there have be...")
 
Line 6: Line 6:
  
 
==Details==
 
==Details==
* [[Firmware image]] for recovery of bricked [[Talos_II|Talos™ II]] on-board NICs.  Note that the MAC addresses inside this image '''must''' be changed to match the MAC addresses on your particular [[Talos_II|Talos™ II]] system; failure to do so may violate law and could potentially cause serious network issues.
+
* [[:File:Bcm5719_talos.bin|Firmware image]] for recovery of bricked [[Talos_II|Talos™ II]] on-board NICs.  Note that the MAC addresses inside this image '''must''' be changed to match the MAC addresses on your particular [[Talos_II|Talos™ II]] system; failure to do so may violate law and could potentially cause serious network issues.
 
* [https://static.raptorcs.com/TALOSII/contest_files/10-hack.lu-nicreverse_slides.pdf Initial reverse engineering effort by Guillaume Delugré]
 
* [https://static.raptorcs.com/TALOSII/contest_files/10-hack.lu-nicreverse_slides.pdf Initial reverse engineering effort by Guillaume Delugré]
  
 
==References==
 
==References==

Revision as of 14:52, 21 December 2017

Overview

The BCM5719 is the NIC integrated into the Talos™ II systems. It is based on the wildly popular NetXtreme architecture, and there have been efforts to document the internal operation of devices based on that architecture.

As the BCM5719 is the only on-board device on the non-SAS Talos™ II variants to use proprietary firmware, Raptor Computing Systems has started a contest to see who can create a truly libre replacement firmware[1]. Anyone with the appropriate skill set is encouraged to take up the challenge, and contributions to this page as the device is analyzed in detail are welcomed.

Details

References