Difference between revisions of "Dual 92mm fan CPU"

From RCS Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
** Tested by q66 on single 18 core system. Reports lower max temp under stress testing and lower noise levels over stock. Achieves max turbo boost.
 
** Tested by q66 on single 18 core system. Reports lower max temp under stress testing and lower noise levels over stock. Achieves max turbo boost.
 
* Noctua NF-A9 PWM
 
* Noctua NF-A9 PWM
−
** Pending testing by nashimus on dual 18 core system. More photos/info to come when board is back from RMA.
+
** Pending testing by nashimus on dual 18 core system, SC747TG-R1400B-SQ chassis. More photos/info to come when board is back from RMA.
  
 
== Attaching The Fans ==
 
== Attaching The Fans ==

Revision as of 08:21, 31 March 2019

Dual 92mm Fan CPU Cooling

It is recommended to choose a high quality fan for this modification. Also, ensure adequate airflow through the chassis.

Fans Used

  • Noctua NF-B9 PWM
    • Tested by q66 on single 18 core system. Reports lower max temp under stress testing and lower noise levels over stock. Achieves max turbo boost.
  • Noctua NF-A9 PWM
    • Pending testing by nashimus on dual 18 core system, SC747TG-R1400B-SQ chassis. More photos/info to come when board is back from RMA.

Attaching The Fans

(Noctua NF-A9 Pictured)

Attached using a thin, but stiff, solid stainless steel wire to connect to partially inserted fan screws.
Fan is a little crooked, in this photo, from being handled. Could add another strand to prevent fan from moving, but it doesn't seem necessary at this point since the fans seem pretty snug once placed.
Due to the placement of the heat sink retention mechanism, the fans stand about a centimeter above the top of the heat sink.
3U CPU NF-A9 04.JPG
Retrieved from "https://wiki.raptorcs.com/w/index.php?title=Dual_92mm_fan_CPU&oldid=2304"