Difference between revisions of "Talos II/Firmware"

From RCS Wiki
Jump to navigation Jump to search
Line 15: Line 15:
 
* Raise CPU core temperature setpoints
 
* Raise CPU core temperature setpoints
 
* Load less aggressive fan curves for CPU temperature control
 
* Load less aggressive fan curves for CPU temperature control
 +
 +
Known Issues
 +
* When fast reboot is enabled, the fan controls may stop working after a reboot.  A normal reboot (host shutdown, power off, power on, IPL) restores the fan control to normal operation.  This is a significant upstream bug in OCC and Raptor Computing Systems is waiting for a fix from IBM.
  
 
== System Package v1.01 ==
 
== System Package v1.01 ==

Revision as of 00:13, 28 April 2018

Talos II Official Firmware Builds

For upgrade instructions, please visit the Firmware Upgrade Quick Start page. Alternatively, for those wishing to build from source, please visit the Compiling Firmware page.

All firmware builds are cryptographically signed with the current Raptor Computing Systems firmware signing key at time of release [1]. The intermediate firmware signer keys, in turn, are signed by our master umbrella key [2].

System Package v1.02

Released: 04-20-2018

Change Log

  • Fix certain DIMMs with unusual SPD frequency values
  • Raise CPU core temperature setpoints
  • Load less aggressive fan curves for CPU temperature control

Known Issues

  • When fast reboot is enabled, the fan controls may stop working after a reboot. A normal reboot (host shutdown, power off, power on, IPL) restores the fan control to normal operation. This is a significant upstream bug in OCC and Raptor Computing Systems is waiting for a fix from IBM.

System Package v1.01

Released: 04-15-2018

Change Log

  • Fix spurious guard of second CPU package.
  • Fix fan control disengaging during IPL
  • Add on-board VGA disable jumper (J10109)
  • Revup host PNOR packages to latest upstream versions
  • Enable WoF on 18 and 22 core packages
  • Enable 2666MHz DDR4 memory DIMMs
  • Add on-board VGA disable jumper support

System Package v1.00

Released: 03-26-2018

Change Log

  • Initial release