Difference between revisions of "File:Blackbird-openbmc-v2.10-bundle.tar"
(== Summary == Built from https://git.raptorcs.com/git/blackbird-openbmc/tag/?h=raptor-v2.00<br> Corresponding GIT hash, as shown on test reports: '''18878e4f6250fdad538c7af3dabf90fd526e9264''' '''A one time process is required to upgrade from firmware versions below 2.00.''' Please read the following instructions carefully before proceeding. ===== Upgrade Instructions ===== * Extract the <CODE>shell_upgrade/blackbird-v2.00-image-bmc.bz2</CODE> file from <CODE>shell_upgrade/blackbird-v2.00-...) |
(No difference)
|
Latest revision as of 19:14, 15 February 2024
Summary
Built from https://git.raptorcs.com/git/blackbird-openbmc/tag/?h=raptor-v2.00
Corresponding GIT hash, as shown on test reports: 18878e4f6250fdad538c7af3dabf90fd526e9264
A one time process is required to upgrade from firmware versions below 2.00. Please read the following instructions carefully before proceeding.
Upgrade Instructions
- Extract the
shell_upgrade/blackbird-v2.00-image-bmc.bz2
file fromshell_upgrade/blackbird-v2.00-image-bmc.bz2
- Decompress
blackbird-v2.00-image-bmc.bz2
and rename toimage-bmc
- Power down your system
- Issue
reboot
on the BMC - Transfer the decompressed BMC image file to
/run/initramfs/image-bmc
on the BMC - Run
fw_printenv | grep eth1addr
and write down the MAC address. You will need this information later - Issue
reboot
on the BMC - After BMC restart (this may take 5-10 minutes):
fw_setenv ethaddr <IPMI MAC address written down earlier>
fw_setenv eth1addr <IPMI MAC address written down earlier>
Note that image-bmc is provided for external recovery and reflashing purposes. Attempting to flash image-bmc to installed system package versions lower than v2.00 will destroy your U-Boot environment variables, requiring that you reconfigure the MAC address of the BMC from the IPMI MAC sticker on the mainboard. Version 2.00 and higher do not have this limitation and it is safe to use the image-bmc upgrade process.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
current | 19:14, 15 February 2024 | (49.34 MB) | SiteAdmin (talk | contribs) | == Summary == Built from https://git.raptorcs.com/git/blackbird-openbmc/tag/?h=raptor-v2.00<br> Corresponding GIT hash, as shown on test reports: '''18878e4f6250fdad538c7af3dabf90fd526e9264''' '''A one time process is required to upgrade from firmware versions below 2.00.''' Please read the following instructions carefully before proceeding. ===== Upgrade Instructions ===== * Extract the <CODE>shell_upgrade/blackbird-v2.00-image-bmc.bz2</CODE> file from <CODE>shell_upgrade/blackbird-v2.00-... |
- You cannot overwrite this file.
File usage
The following file is a duplicate of this file (more details):
There are no pages that use this file.