Talos II/Hardware Compatibility List
Jump to navigation
Jump to search
This is a collection of components known to work with the Talos™ II-based solutions. It's maintained by both Raptor CS and community members.
Contents
Cases
- SuperMicro SC732i-500B
- Not recommended for 12 core and higher CPUs
- SuperMicro SC732D4-903B
- Add-on sound card recommended
- Add-on USB 2.0 card or USB 3.0 hub recommended
- SuperMicro SC747TQ-R1400B
- Hot swap drive capable; SAS recommended
- Recommended for use with one or more high-end GPUs
Known problematic cases
- Fractal Design Define XL R2 is missing standoff holes for the top-left and top-middle positions.
- Some alternative standoff in at least the top-middle position may be required to prevent too much bending of the motherboard while inserting RAM.
- BeQuiet Dark Base 900
- The case claims to support E-ATX on the BeQuiet website, but they also have an infographic showing the motherboard space to only be 322mm deep, which is 8.2mm short of the full-size E-ATX. Emailed them for clarification, but no response. Can't confirm either way.
Power Supplies
When planning to run with both CPU sockets populated keep in mind that the power-supply should support also 2 8-pin EPS connectors.
- Seasonic
Memory
Module | Validation | |||||||
---|---|---|---|---|---|---|---|---|
Manufacturer | Model | Size | Speed | Type | ECC | Stepping | Firmware | Source |
Pacific Sun | X10723042S | 8GB | DDR4-19200 | Registered | Yes | POWER9 DD2.1 | Hostboot cc2d45a | Official |
Kingston | KTH-PL424/16G | 16GB | DDR4-19200 | Registered | Yes | POWER9 DD2.1 | Hostboot cc2d45a | Official |
Micron | MTA18ASF2G72PZ-2G3B1 | 16GB | DDR4-19200 | Registered | Yes | POWER9 DD2.2 | Hostboot 28927a7 | Official |
Micron | MTA18ASF2G72PDZ-2G3D1 | 16GB | DDR4-19200 | Registered | Yes | POWER9 DD2.1 | Hostboot cc2d45a | Official |
Samsung | M393A4K40BB1-CRC | 32GB | DDR4-19200 | Registered | Yes | POWER9 DD2.1 | Hostboot 1e2221d | Official |
Known Incompatible Memory
NOTE: Memory may be removed from this table after firmware support has been added, or there may be a fundamental hardware incompatibility. If you have incompatible memory listed in the table below, you may want to bookmark and check this page from time to time to see if a firmware update has resolved the issue.
Module | Test Conditions | |||||||
---|---|---|---|---|---|---|---|---|
Manufacturer | Model | Size | Speed | Type | ECC | Stepping | Firmware | Last Test |
Samsung | M386A8K40BMB-CRC | 64GB | DDR4-19200 | Registered LRDIMM | Yes | POWER9 DD2.1 | Hostboot 1e2221d | 02/14/2018 |
SAS/SATA Storage Drives
Connected via optional on-board PM8068 controller, or via PCIe controller. NVMe cards are also supported.
PCIe Devices
Storage Controllers
- LSI 9300 SAS HBAs
- PM8068-based SAS HBAs
NVMe Storage Drives
- Samsung 960 EVO / PRO (with M.2 to PCIe adapter)
Graphics Cards
- Radeon R9 290X
- AMD Radeon Pro WX7100 - Available pre-installed on Talos II workstation, server, and desktop configurations.
No display? Check out the GPU Troubleshooting page.
Sound Cards
- Creative Sound Blaster Audigy FX SB1570 PCIe 5.1 Sound Card
- Creative Sound Blaster X-Fi Xtreme Fidelity PCIe Audio Sound Card (SB0880)
...
CAPI Devices
- Mellanox ConnectX-6 EN 200Gb/s Adapter Card