Difference between revisions of "BCM5719"
Jump to navigation
Jump to search
Line 3: | Line 3: | ||
The BCM5719 is the [[NIC|NIC]] integrated into the [[Talos_II|Talos™ II]] systems. It is based on the wildly popular NetXtreme architecture, and there have been efforts to document the internal operation of devices based on that architecture. | The BCM5719 is the [[NIC|NIC]] integrated into the [[Talos_II|Talos™ II]] systems. It is based on the wildly popular NetXtreme architecture, and there have been efforts to document the internal operation of devices based on that architecture. | ||
− | As the BCM5719 is the only on-board device on the non-SAS Talos™ II variants to use proprietary firmware, Raptor Computing Systems has started a contest to see who can create a truly libre replacement firmware<ref>https://www.raptorcs.com/TALOSII/nic_fw_contest.php</ref>. Anyone with the appropriate skill set is encouraged to take up the challenge, and contributions to this page as the device is analyzed in detail are welcomed. | + | As the BCM5719 is the only on-board device on the non-SAS [[Talos_II|Talos™ II]] variants to use proprietary firmware, Raptor Computing Systems has started a contest to see who can create a truly libre replacement firmware<ref>https://www.raptorcs.com/TALOSII/nic_fw_contest.php</ref>. Anyone with the appropriate skill set is encouraged to take up the challenge, and contributions to this page as the device is analyzed in detail are welcomed. |
==Details== | ==Details== |
Revision as of 15:55, 21 December 2017
Overview
The BCM5719 is the NIC integrated into the Talos™ II systems. It is based on the wildly popular NetXtreme architecture, and there have been efforts to document the internal operation of devices based on that architecture.
As the BCM5719 is the only on-board device on the non-SAS Talos™ II variants to use proprietary firmware, Raptor Computing Systems has started a contest to see who can create a truly libre replacement firmware[1]. Anyone with the appropriate skill set is encouraged to take up the challenge, and contributions to this page as the device is analyzed in detail are welcomed.
Details
- Firmware image for recovery of bricked Talos™ II on-board NICs. Note that the MAC addresses inside this image must be changed to match the MAC addresses on your particular Talos™ II system; failure to do so may violate law and could potentially cause serious network issues.
- Initial reverse engineering effort by Guillaume Delugré