Difference between revisions of "Talos II/Firmware/Public Beta"

From RCS Wiki
Jump to navigation Jump to search
m
Line 11: Line 11:
 
* BMC:  [[:File:Talos-ii-1.07-beta-bmc.img.bz2|b543a63b187dc80620e9749636ebfe9198afadd2]]
 
* BMC:  [[:File:Talos-ii-1.07-beta-bmc.img.bz2|b543a63b187dc80620e9749636ebfe9198afadd2]]
 
* PNOR: [[:File:Talos-ii-1.07-beta-pnor.img.bz2|3b949c17dd43fcdbaad999b24863c64176d3e3bf]]
 
* PNOR: [[:File:Talos-ii-1.07-beta-pnor.img.bz2|3b949c17dd43fcdbaad999b24863c64176d3e3bf]]
 +
 +
===== Instructions =====
 +
* Power down your system
 +
* Transfer the decompressed BMC image file to /run/initramfs/image-bmc on the BMC
 +
* Issue "reboot" on the BMC
 +
* After BMC restart (this may take 5-10 minutes):
 +
** fw_setenv ethaddr <IPMI MAC address on sticker>
 +
** fw_setenv eth1addr <IPMI MAC address on sticker>
 +
* Transfer decompressed PNOR image file to the BMC /tmp directory
 +
** pflash -E -p /tmp/talos.pnor
 +
** pflash -P CVPD -c
 +
 +
===== Known Issues =====
 +
* ?
 +
 +
===== Regressions =====
 +
* ?

Revision as of 02:43, 27 April 2019

Public Beta Firmware

Introduction

From time to time Raptor may make public beta firmware images available. These are normally firmware images that are on a fast track to wide GA release, but for which Raptor is seeking public feedback about any issues encountered during upgrades or features missing for daily use.

WARNING Beta images have not undergone full release qualification. It is possible that upgrades may fail, leaving your system in a state requiring advanced recovery (e.g. loading a replacement BMC firmware image over TFTP and flashing it via the serial console, or externally writing the BMC Flash device with an SPI programmer). Please do not try the beta firmware images unless you have sufficient recovery tools available.

Current Beta Images

1.07-next (04-16-2019 branch)

Instructions
  • Power down your system
  • Transfer the decompressed BMC image file to /run/initramfs/image-bmc on the BMC
  • Issue "reboot" on the BMC
  • After BMC restart (this may take 5-10 minutes):
    • fw_setenv ethaddr <IPMI MAC address on sticker>
    • fw_setenv eth1addr <IPMI MAC address on sticker>
  • Transfer decompressed PNOR image file to the BMC /tmp directory
    • pflash -E -p /tmp/talos.pnor
    • pflash -P CVPD -c
Known Issues
  •  ?
Regressions
  •  ?